If you own a Samsung Top Load Washer and you have one or more of the following issues:
You may need to replace the lid lock assembly on your washer. The following instructions outline the steps for removing and replacing the lid lock assembly on the 4.5 cu ft Samsung Top Load Washer Model #WA45M7050AW/A4. The Lid Lock Assembly is part no. DC34-00025E. For this repair, you will need a #2 Phillips’ head screwdriver and a small prying tool like a flathead screwdriver. And as with any repair, pay close attention to the placement of parts and steps for removing the malfunctioning part, as you will need to put everything back in place for the appliance to operate.
1. Always start any appliance repair by unplugging the unit from the wall outlet. And don’t forget to turn off the water source to the washer.
2. Remove the console cover:
3. Disconnect the lid lock assembly wire harness
4. Disconnect the top of the washer
5. Lift the top of the washer
6. Remove the lid lock assembly
7. Install replacement lid lock assembly
8. Reassemble the washing machine, being certain to bend the wire plate guard back into place and replace all screws in their proper holes. If you need assistance with this or any other appliance repair, contact us at Jerry’s Appliance Repair for timely, quality service.
The handle on your oven is meant to last longer than the lifespan of your…
A dishwasher is an essential appliance in helping keep on top of dirty dishes without…
If you have started your washer and come back when it should be finished only…
Accidents happen and the exterior of your dishwasher can bear the brunt of them. If…
Do you own a black, white or stainless steel Frigidaire or Kenmore brand electric wall…
In most cases, when the oven door will not open, it is because it is…
Leave a Comment